New model: Variable-frequency drive 3 phase
- Power: 380-420V (±10%), 50/60Hz (±5%)
- Motor setting by auto-tuning
- Braking transistor to add
- Direct current injection
- 8 TOR entries (0-24V in PNP or NPN), 3 analogue inputs (0-10V, 4-20mA), 2 transistor outputs, 1 relay output, 2 analogue outputs
- Vector control without sensor perfect
- Low-frequency torque at 0.25 Hz
- Protection against short circuit
- Blower triggering control
- V/F (automatic slip compensation); or open-loop vector control or closed-loop vector control
- Output frequency from 0.00 to 300.00Hz in vector control, 0.00 to 3200.00Hz in constant torque application U/F (stability ±0.50 Hz)
- Starting torque 150% to 0.5 Hz
- Overload capacity: 150% during 1 min, 180% during 2 s
- Keyboard monitoring, terminal block control, MODBUS communication; (RUN, STOP, AV, AR, frequency, emergency stop...)
- Operation in 7 speed ranges, PID...
*The warranty only applies if the VFD is used in an IP55 electrical cabinet.
Reference
Power
In
Dimension (mm)
Height*Width*Depth
Height*Width*Depth
VFR_050T4_0K75
0,75 KW
2,1 A
185/90/154
VFR_050T4_1K5
1,5 KW
3,7 A
185/90/154
VFR_050T4_2K2
2,2 KW
5,1 A
185/90/154
VFR_050T4_4K
4 KW
9 A
185/90/174
VFR_050T4_5K5
5,5 KW
13 A
260/120/190
VFR_050T4_7K5
7,5 KW
17 A
260/120/190
Online support
Different monitoring modes of inverters
Braking and resistance on an inverter
How to install an inverter on a combination woodworking machine?
How to protect your frequency inverter?
Lathe tutorial
How to monitor in a multi-speed way a frequency inverter?
How to choose a single-phase or 3-phase inverter?
How to connect a remote on an inverter?
Videos
Related products