Shopping Cart
There are no more items in your cart
Electrical connecting screw terminal for DIN rail mounting
These terminals with multi levels enable to save space and to facilitate cabling for components such as sensors, motors or other actuators, with 3 or 4 wires. Supply terminals for sensors (+ and -), as well as earth, can be connected together (cross-connection CC25_10T), enabling an easier identification and to save time.
Terminal
Description
Diagram
Application
Photos
ERT2E
2 through ways + earth
thickness 6 mm, strand 0.5 to 4 mm²
thickness 6 mm, strand 0.5 to 4 mm²

For coil or
actuator
actuator

ERT3
3 through ways
thickness 6 mm, strand 0.5 to 4 mm²
thickness 6 mm, strand 0.5 to 4 mm²

For sensor, actuator
Single or 3-phase
Single or 3-phase

ERT3E
3 through ways + earth
thickness 6 mm, strand 0.5 to 4 mm²
thickness 6 mm, strand 0.5 to 4 mm²


For actuator
3-phase
3-phase

ERT3S
3 ways, including 1 through way
thickness 6 mm, strand 0.5 to 4 mm²
thickness 6 mm, strand 0.5 to 4 mm²
For sensor

ERD4BEIGE
2 through ways
thickness 6 mm, strand 0.5 to 4 mm²
thickness 6 mm, strand 0.5 to 4 mm²

For coil or actuators
continuous
continuous

ERD4DBEIGE
2 through ways with diode
thickness 6 mm, strand 0.5 to 4 mm²
thickness 6 mm, strand 0.5 to 4 mm²

For coil or actuators
continuous with diode
continuous with diode

ER4C
1 through way:
1 input 2 outputs thickness 6 mm, strand 0.5 to 4 mm²
1 input 2 outputs thickness 6 mm, strand 0.5 to 4 mm²
For coil or actuator
continuous
continuous

Accessories
EPT2E
Extremity cover for ERT2E

EPT3
Extremity cover for ERT3

EPT3E
Extremity cover for ERT3E

EPT3S
Extremity cover for ERT3S

EP4
Extremity cover for ERD4

EP4C
Extremity pad for ER4C

CC25_10T
Central cross connector for ERT

Related products