For 3-phase electric induction motor
15KW to 250KW
Delivery throughout Europe
Secure payment
English speaker +33535565788
Soft starters enable to cut inrush currents when starting the motor (6 In), without using a star/delta starting, an autotransformer or a starting resistance. Soft starters also handle the rotation direction of the motor and STOP phases.
Once the starting phase is over (when the regime is permanent), the starter is shunted by a shunting contactor.
Functions available:
- protection against motor overload, phase failure and thermal protection integrated.
- default output
- engine diagnosis
- Keyboard command or by terminal block.
- fault memory
- curve I setting according to the application
Technical characteristics:
- Nominal working voltage: 400VAC, 50Hz.
- Allowable voltage difference: + or - 10%.
- Phase unbalance: <3%.
- Oscillation frequency: <5%
Softs starters sold without contactors (all contactors are available here, you will find correspondences in the table below)
motor (KW)
current (A)
cross-section (mm²)
WxHxD
Based on 1
review
-
Eric g.
Published Jan 08, 2024 at 10:12 am (Order date: Jan 02, 2024)420 : Not tried yet. However, no manual in French. (Translated review)
Related products