Power solid state relay
Power solid state relay 1 and 2 poles, 10 to 40 A
€7.65
€7.27
Excl. tax
| Control voltage | 220 V 400 V |
| Nominal current | 20A 40 A |
| Combinations | Control voltage | Nominal current | Reference | Stock | Price | Add to cart |
|
Control voltage :
220 V
Reference : RST_1_2_20
|
220 V |
20A |
RST_1_2_20 |
Available now Stock : 10 |
€7.65 Tax excl. - 5% €7.27 Tax excl. |
€7.65 Tax excl. |
|
Control voltage :
220 V
Reference : RST_1_2_40
|
220 V |
40 A |
RST_1_2_40 |
Available now Stock : 7 |
€19.75 Tax excl. - 5% €18.76 Tax excl. |
€19.75 Tax excl. |
|
Control voltage :
400 V
Reference : RST_2_4_40
|
400 V |
40 A |
RST_2_4_40 |
Available now Stock : 1 |
€19.93 Tax excl. - 5% €18.93 Tax excl. |
€19.93 Tax excl. |
Power solid state relay 1 and 2 poles, 10 to 40 A
Solid state relays act like contactors: when a voltage (between 2 and 32 VDC) is applied on the command, the transistor turns on and supplies the load.
Technical characteristics:
* CMOS Technology.
* Plastic protection cover.
* Isolation voltage: 1000 M?/min (500V).
* Pulse voltage stability: 2000V, 50Hz
* Dielectric strength 2500VAC/1 min.
* Leakage current <2mA.
* Switching time <10ms.
* Operating temperature: -5°C + 65°C, relative humidity: 35 - 85%RH.
* Zero crossing control.
The radiator sizing is critical for the component lifetime. The following formula gives the power to dispose: active current of the load (A) x 3.0 W/A.
Attention: the solid state relay must be protected by a varistor against output overvoltage,
especially when using an inductive load.
RST_1_2_20
10 Items
