Operation:
2 thresholds voltage U1 (lower voltage) and U2 (upper voltage) are set via potentiometer. Change of phase voltage on one of phases above or below set voltage thresholds will cause activation of relay.
When the voltage returns in the control phase, the contact goes back at its original state.
- Presence voltage by LED
- Setting U1 150-210V; U2 230-260V
- Hysteresis U1, U2 : 5V
- Activation time: 1.5 S
- Consumption 0.8W
In order to avoid too much frequent changes in case of ongoing fluctuations of voltage (10 per minutes), the relay is locked for 10 minutes.
(Ref supplier)
(without time lock)
50-450 VAC
(CP710)
(with time lock)
50-450 VAC
(CP730)
3 x 50-450 VAC
Select your control relay | RLT_SRV_3NT RLT_SRV_1NT RLT_SRV_1N |
Combinations | Select your control relay | Reference | Stock | Price | Add to cart |
Select your control relay :
RLT_SRV_3NT
Reference : RLT_SRV_3NT Stock : 1 |
RLT_SRV_3NT |
RLT_SRV_3NT |
Available now Stock : 1 |
€58.99 Tax excl. €56.04 Tax excl. - 5% |
€58.99 Tax excl. |
Select your control relay :
RLT_SRV_1NT
Reference : RLT_SRV_1NT Stock : 1 |
RLT_SRV_1NT |
RLT_SRV_1NT |
Available now Stock : 1 |
€32.70 Tax excl. €31.07 Tax excl. - 5% |
€32.70 Tax excl. |
Select your control relay :
RLT_SRV_1N
Reference : RLT_SRV_1N Stock : 0 |
RLT_SRV_1N |
RLT_SRV_1N |
Available later |
€35.70 Tax excl. €33.92 Tax excl. - 5% |
€35.70 Tax excl. |